Older Cable Box - Mitsubishi Electric LT-40148 Owner's Manual

26
3. TV Connections
6.
Connect either an S-Video or composite video
cable from VIDEO OUT on the VCR back panel
to a VIDEO composite or S-VIDEO jack on the TV
main panel. Connect only one type of video cable.
S-Video is preferable to composite video, if avail-
able.
7.
To use the TV speakers with the VCR, connect left
(white) and right (red) audio cables from AUDIO OUT
on the VCR back panel to the associated INPUT
AUDIO L and R on the TV main panel. If your VCR
is mono (non-stereo), connect only the white (left)
cable.
Note: When using this connection configuration with the
connections used in step 5, it is possible to view
live cable programs through the VCR Device. For
best picture quality always view live cable programs
directly from the TV input connected to the cable
box device.

Older Cable Box

Required: One coaxial cable.
Note: This connection is not recommended. The
other connections described in this chapter
provide better quality audio and video to the TV
and allow NetCommand to work with the cable
box.
1.
Connect the incoming cable to
2.
Connect one coaxial cable from
box to ANT 1 on the TV main panel.
HDMI
4
3
2
1
IR-
NetCommand
S-VIDEO
Output / External
Controller Input
INPUT3
Pr
VIDEO
Pb
L
AUDIO
R
TV main panel
Y Y / VIDEO
DVI/PC
L L
AUDIO
AUDIO
R
R
INPUT2 INPUT1
DIGITAL
AUDIO
OUTPUT
L R
AVR AUDIO
OUTPUT
ANT1/MAIN
ANT2/AUX ANT1/MAIN ANT1/MAIN
Figure 10. Connecting an older cable box
IN on cable box.
OUT on the cable
Incoming
cable
1.
Cable
IN
box
OUT
2.
2.