Set-Back Configuration Setup
•
Do not remove the stand.
• The Display is heavy. Move it with two or more people.
1. Place the 42" LCD Display on a sturdy surface.
2. Remove the HD-6000 Receiver/Controller from its carton.
3. Remove the protective material from around the HD-6000 and place it on a sturdy surface.
4. Turn the HD-6000 over so that the bottom is facing up and gently place it on the protective material.
5. Attach the 4 Mounting Hooks.
���������� �����
When the HD-6000 is connected to the 42" LCD,
the HD-6000 front control buttons are inactive.
To control the HD-6000 (and 42" LCD), set the
remote control to the CABLE/DBS/DTV Layer
or use control buttons located on the side of the
LCD Display.
CAUTION
16