Camera Title/Memo Setting; Time Date/Display Settings; Duplex Mode Display - Mitsubishi Electric DX-NT400E Installation And Operation Manual

Example: Setting titles of "ENTRANCE" and "COUNTER"
to camera number "
memo of "BANK."
1. Press the SET UP button } <SETTINGS> } Select
"CAMERA TITLE/MEMO SETTING" in the <TIME DATE/
DISPLAY SETTINGS> screen and then press the ENTER
button.
• The <CAMERA TITLE/MEMO SETTING> screen appears.
<CAMERA TITLE/MEMO SETTING>
1
>>
2
3
4
MEMO
ENTER:CHARACTERS
2. Press the JOG
and then press the ENTER button.
• The <CHARACTERS> screen appears and the leftmost
character of the string is highlighted.
<CHARACTERS>
••••••••••••••••
! " # $%& ' ( ) + , -. / : ; < = >?@•••••••
0123456789••••••••••••••••••••
ABCDEFGHIJKLMNOPQRSTUVWXYZ••••
abcde f gh i j k l mnopq r s t u v w x y z ••••
ÀÁÂÃÄÅÆÇÈÉÊËÌÍÎÏ ÑÒÓÔÕÖ ØÙÚÛÜ
ß••••••••••••••••••••••••••••
àáâãäåæçèéêë ì í î ï ñòóôõö øùúûü
ÿ••••••••••••••••••••••••••••
CLEAR:BACK
3. Press the ENTER button.
• The leftmost character on the first line of the available
characters, " " (space), turns red and flashes.
4. Use the JOG , , ,
the ENTER button.
• "E" appears on the leftmost of the string and be highlighted.
5. Press the JOG
on the right side.
6. Repeat steps 3 to 5 to input "ENTRANCE" in the string.
• To erase an input character, move the cursor to the leftmost
character, " " (space), then press the ENTER button to
determine such setting.
To change a character input in error:
1. While one of the characters in the string is
highlighted, press the JOG , ,
to highlight the character to be changed.
2. Follow the steps 3 and 4.
7. When completed with input, press the CLEAR button.
• The display returns to the <CAMERA TITLE/MEMO
SETTING> screen.
8. Repeat steps 2 to 7 for camera number "
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
" and " ," respectively, and setting
1 4
••••••••••••••••
••••••••••••••••
••••••••••••••••
••••••••••••••••
••••••••••••••••
CLEAR:BACK
, buttons to select camera number "
buttons to select "E" and then press
or button to highlight the next character
, and
" and MEMO.
4
<CAMERA TITLE/MEMO SETTING>
>>
ENTER:CHARACTERS
9. Press the CLEAR button or the SET UP button.
Example <SPLIT4 SCREEN SETTING>
03-03-2003 21:25:40
ENTRANCE
,"
1
Example <MEMO SETTING>
<SETTINGS>
>>TIME DATE/DISPLAY SETTINGS

DUPLEX MODE DISPLAY

This item is used to display the operational conditions such
as PLAYBACK, REC and ALARM REC (ALARM REC is
displayed in red during emergency recording), etc., on the
top or bottom of the screen.
<TIME DATE/DISPLAY SETTINGS>
>>DUPLEX MODE DISPLAY
Setting (default : "BOTTOM")
"BOTTOM": Displays the operational condition on
the bottom of the screen.
buttons
"NONE": Does not display the operational condition.
"TOP": Displays the operational condition on the top
of the screen.
1. Press the SET UP button } <SETTINGS> } Select
"DUPLEX MODE DISPLAY" in the <TIME DATE/DISPLAY
SETTINGS> screen. Display the desired setting and determine
such setting.
2. Press the CLEAR button or the SET UP button.
1
ENTRANCE
2
••••••••••••••••
3
••••••••••••••••
4
COUNTER
MEMO BANK
CLEAR:BACK
COUNTER
MPX DISPLAY SETTINGS
MOTION DETECTION SETTINGS
RECORD SETTINGS
TIMER PROGRAM SETTINGS
INITIAL SET UP/INFORMATION
MEMO: BANK
TIME DATE ADJUST
DISPLAY MODE
CLOCK LOCATION SETTING
CAMERA DISPLAY NUMBER

CAMERA TITLE/MEMO SETTING

BOTTOM
1
35