Table of Contents
Advertisement
CHANGING THE AUDIO
LANGUAGE OR SOUND MODE
DVD-A
DVD-V
This DVD player has a function which allows you to
select the desired audio language and sound mode.
For DVDs
Press the AUDIO button during playback, and then press
the AUDIO button to select the desired audio language.
¡
The audio language can be changed if multiple
languages are recorded on the DVD being played.
1 ENG Dolby D 5.1ch 48k/3
2 FRE Dolby D 5.1ch 48k/3
3 JPN Dolby D 5.1ch 48k/3
HELLO
For audio CDs
Press the AUDIO button during playback.
¡
Pressing the AUDIO button cycles the sound mode
through STEREO, L-CH and R-CH.
STEREO
L-CH
R-CH
SETTINGS
DVD-RW
CD
VCD
Bon jour
For DVD Audios
Notes
¡
Pressing the Audio button may not work on some DVDs with
multiple audio languages (e.g. DVDs which allow audio
language setting on the disc menu). Operation varies between
discs, so refer to the manual accompanying the disc.
¡
Current audio language and sound mode will be
displayed when you press the AUDIO button at first.
¡
If a desired language is not shown after pressing the Audio
button several times, the disc does not have an audio source in
that language.
¡
If you choose a Language that has a 3 letter language code, the
code will be displayed every time you change the Audio
language setting. If you choose any other languages, '---' will
be displayed instead. (Refer to page 30.)
¡
The audio language resets to the one which has been selected
in the setup mode, every time the power is turned on or discs
are replaced. If that language is not available on a disc, a
language defined by the disc is selected.
¡
The screen display will disappear after about 5
seconds.
¡
DTS CD does not allow the user to switch the sound mode.
¡
The selected sound number is, in case of DVD Audio, displays
to number 2 normally even if there is no second sound. (The
sound number during playback remains as 1.)
For Video Recording Format
For discs of DVD-RW in which sound is recorded in
dual sound (bilingual) mode, the user can switch the
sound mode between the main and sub sound.
Press the AUDIO button during playback.
¡
Pressing the AUDIO button cycles the sound mode
through MAIN, SUB, MAIN+SUB.
¡
The user cannot switch the sound mode when playing a
disc in which sound was not recorded in dual sound mode.
– 24 –
1. LPCM 5.1ch 96k / 2
2. PPCM 2.0ch 96k / 2
1. MAIN
1. SUB
1. MAIN+SUB
EN
1L25
Advertisement
Table of Contents
