Mitsubishi Electric MELSERVO MR-J2S- A Instruction Manual page 35

1. FUNCTIONS AND CONFIGURATION
(3) For MR-J2S-700A
Removal of the front cover
B)
2)
1)
A)
1) Push the removing knob A) or B), and put you
finger into the front hole of the front cover.
2) Pull the front cover toward you.
A)
1) Insert the two front cover hooks at the bottom into the
sockets of the servo amplifier.
2) Press the front cover against the servo amplifier until the
removing knob clicks.
1 - 16
Reinstallation of the front cover
Front cover
hook
(2 places)
2)
1)
Front cover socket
(2 places)