Table of Contents
Advertisement
PRECAUTIONS
PRECAUTIONS
1. Do not attempt to disassemble the camera.
There are no user serviceable parts inside. Ask a qualified service
person for servicing
2. Handle the camera with care.
Do not misshandle the camera. Avoid striking, shaking, etc. Improper
handling or storage could damage the camera.
3. Do not expose the camera to rain or moisture, or try to operate it
in wet areas.
Turn the power off immediately and ask a qualified service person for
servicing. Moisture can damage the camera.
4. Do not use strong or abrasive detergents when cleaning the
camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard
to remove, use a mild detergent and wipe gently. Afterwards, wipe off
the remaining part of the detergent with a dry cloth.
5. Clean the CCD faceplate with care.
Do not clean the CCD with strong or abrasive detergents. Use lens
tissue or a cotton tipped applicator and ethanol.
6. Never face the camera towards the sun. Do not aim the camera at
bright objects.
Whether the camera is in use or not, never aim it at the sun or other
extremely bright objects. Otherwise, blooming or smear may be
caused.
7. Do not operate the camera beyond the specified temperature,
humidity or power source ratings.
Use the camera in conditions where temperature is between
–10 °C ~ +50 °C, humidity is below 80% without moisture and the
power source is DC 12 V (± 10%).
Page : 3
Advertisement
Table of Contents
