Long Operation; Timer Operation (On/Off Timer) - Mitsubishi Electric Mr.Slim MSH24WN Operating Instructions Manual

LONG OPERATION

Perform the following operations while the
Use this operation when you want the air flow to
unit is operating.
reach a long distance.
I
Mechanism of the LONG operation
˚F
˚C
In the following example, the VERTICAL VANE is set to
CLOCK
AMPM
(front).
AMPM
TOO TOO
ON/OFF
WARM COOL
FAN STOP
I FEEL COOL Fan speed: Higher
Solid arrow: When the LONG mode is used
VANE START
Dotted arrow: When the LONG mode is not used
HEAT DRY
To release the LONG mode:
MODE WIDE VANE HR.
LONG MIN. I
RESET CLOCK
I LONG mode is also released by pressing the
I Even when the LONG mode is being used, the air may not
reach a long distance due to the installation location of the
air conditioner.
In this case, press the
I
MODE
OFF timer (explained on the right) are available.
10
LONG
Press the button.
The fan speed increases.
When the fan speed is set to (AUTO), the fan speed
is higher than a fan speed determined by the room
temperature and the set temperature.
In addition, the HORIZONTAL VANE moves to the po-
sition for LONG mode.
COOL/DRY HEAT
LONG
Press the button again.
VANE
button.
FAN
button to set the fan speed to
LONG
(High), and then press the button.
, FAN , and WIDE VANE buttons, temperature buttons and the ON/

TIMER OPERATION (ON/OFF TIMER)

TIMER
How to set the ON timer
It is convenient to set the timer when you go to
bed, when you get home, when you get up, etc.
1
2
˚C
CLOCK
AMPM
To release the ON timer:
I
AMPM
TOO TOO
ON/OFF
WARM COOL
How to set the OFF timer
1
FAN STOP
I FEEL COOL
2
VANE START
HEAT DRY
MODE WIDE VANE HR.
LONG MIN. To release the OFF timer:
I
RESET CLOCK
Programming timer operation
The ON timer and the OFF timer can be used in combination.
The timer of the set time that is reached first will operate first.
(" " mark indicates the order of timer operations.)
I If the current time has not been set, the timer operation can-
not be used.
NOTE
If the main power is turned off or a power failure occurs
while AUTO START/STOP timer is active, the timer setting
is cancelled. As this model is equipped with an auto restart
function, the air conditioner should start operating at the
same time that power is restored.
START
Press the button during operation.
Each time the button is pressed, the ON timer mode
alternates between ON and OFF.
HR.
Set the time of the timer using the
MIN.
and buttons.
HR.
Each time the button is pressed, the set time in-
MIN.
creases by 1 hour; each time the button is
pressed, the set time increases by 10 minutes.
START
Press the button.
STOP
Press the button during operation.
Each time the button is pressed, the OFF timer mode
alternates between ON and OFF.
HR.
Set the time of the timer using the
MIN.
and buttons.
HR.
Each time the button is pressed, the set time in-
MIN.
creases by 1 hour; each time the button is
pressed, the set time increases by 10 minutes.
STOP
Press the button.