Table of Contents
Advertisement
18
Chapter 1. Television Overview
TV Back Panel
ANT2 / AUX
ANT1 / MAIN
ANT 1 and ANT 2
on WD-52631
1
2
1. ANT 1/MAIN, ANT 2/AUX (Antenna)
If you are connecting an antenna, direct cable without
a cable box, or are using cable with a CableCARD™,
connect the main antenna or cable source to
ANT 1/MAIN.
ANT 1/MAIN and ANT 2/AUX can each receive both
digital and analog over-the-air channels from a VHF/UHF
antenna or non-scrambled digital/analog cable source.
ANT 1/MAIN and CableCARD™ (models WD-57731 and
WD-65731)
Use ANT 1/MAIN to receive premium subscription cable
TV service authorized by the CableCARD™ access card.
The CableCARD access card is provided by your local
cable company. ANT 2/AUX can continue to receive
over-the-air or non-scrambled cable signals when ANT 1
is used for CableCARD™ service.
3
12
9
6
5
7
2. CableCARD™ Slot
(models WD-57731 and WD-65731)
The CableCARD access card from your cable TV service
provider is inserted into this slot. When inserting, ensure
that the top of the card faces in the direction indicated by
CARD TOP
.
If your cable company is not currently offering CableCARD
access cards, use the cable box provided and authorized by
your local cable company to view scrambled channels.
3. INPUT 1 and 2 Inputs
(Audio and Video)
INPUT 1 and 2 can be used to connect a VCR, Super
VHS (S-VHS) VCR, DVD player, standard satellite receiver,
or other A/V device to the TV. INPUT 3 is a third set
of jacks located on or near the front of the TV for conve-
nience. Please note that if S-VIDEO and VIDEO are
both available, you must choose to connect only one.
4
10
11
8
Hide quick links:
Advertisement
Table of Contents
