Tub Clean; Door Lock - LG F1255FD Owner's Manual

How to use washer

Tub Clean

I
Tub Clean is a special cycle to clean the inside of the washing machine.
A higher water level is used in this cycle at higher spin speed. Perform this cycle regularly.
NOTE
• Do not add any detergent to the detergent compartments.
• Excessive suds may generate and leak from the washer.
CAUTION
• If there is a child, be careful not to leave the door open for too long.

Door Lock

I
1. Remove any clothing or items from the
washer and close the door.
2. Open the dispenser drawer and add Anti
limescale(e.g. Calgon) to the main wash
compartment.
3. Close the dispenser drawer slowly.
4. Power On and then press Tub Clean button.
then " " will be displayed on the LED
display.
5. Press the Start/Pause button to start.
6. After the cycle is complete, leave the door
open to allow the washer door opening,
flexible gasket and door glass to dry.
• "Door Lock" - For safety reasons, the
door will lock while machine is in use and the
"Door Lock" icon will light up. You can safely
open the door after the "Door Lock" icon
turns off.
25