Table of Contents
Advertisement
5320/5330/5340 SIP User and Administrator Guide
Transfer a Call to an Unconnected Third Party
1. While on a call, press
2. Press a free Line key.
3. Call the party to whom you want to transfer the call, and then do one of the following:
•
To talk to this party, wait until the connection is established, speak to the party, press
(TRANS/CONF), and then hang up.
•
To transfer the call without speaking to this party, immediately press
(TRANS/CONF), and then hang up. The held call will be transferred to the call in
progress.
•
To cancel the transfer, press
Transfer a Call to a Third Party Already on Hold
1. While on a call, press
2. Press the Line key of the call on hold, and then press
3. Hang up.
Conference Call (Three-Way)
When two parties are connected on a call, either of those parties can originate a three-way
conference by adding a third party to the call in progress. Once three parties are connected, no
more parties can be added to that call.
A party can be involved in more than one three-way conference call at a time, but the calls cannot
be merged. For example, A and B are on a call. A adds C to create three-way conference call
ABC. B adds D to the call with A to make conference call ABD. ABC and ABD remain separate–
D is not added to conference call ABC.
Add a Third Party to a Call in Progress
1. Press
2. Press a free Line key, and then do one of the following:
•
Dial the number.
•
Press a Speed Dial key.
•
Press
3. Press Conf. The call you put on hold in step 1 is now connected to the call in progress.
Note: If the new party does not answer, press
Note: Each conference member (other than the conference initiator) may initiate another
three-way conference.
22
(TRANS/CONF). The call is put on hold.
(TRANS/CONF). The call is put on hold.
(TRANS/CONF). The current call is put on hold.
(REDIAL). .
(CANCEL). You are returned to the held call.
(CANCEL) twice to return to the held party.
(TRANS/CONF).
Hide quick links:
Advertisement
Table of Contents
