Removing the display
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Remove the battery.
Disconnect the antenna cables from the wireless card.
Peel off the tape that secures the antenna cables to the display hinge.
Remove the antenna cables from the routing guides on the computer
Remove the screws that secure the display-cable bracket to the system
Lift the display-cable bracket off the system board.
Using the pull tab, disconnect the display cable from the system board.
Peel off the tape that secures the Windows-button board cable to the
Lift the latch and disconnect the Windows-button board cable from the
computer. After working inside your
After working inside your