Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Using the alignment posts, place the I/O board on the computer base.
Align the screw holes on the I/O board with the screw holes on the
Replace the screw that secures the I/O board to the computer base.
Connect the power and volume-buttons board cable to the I/O board.
Connect the I/O-board cable to the I/O board.
Follow the procedure from step 4 to step 7 in
Replace the battery.
computer. After working inside your
After working inside your
"Replacing the hard