Download Print this page

Dell Inspiron 15 7000 Series Service Manual: Replacing The Power And Volume-buttons Board

Hide thumbs

Advertisement

Replacing the power and
volume-buttons board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Slide the power and volume-buttons board into the slot on the computer
base and snap the power and volume-buttons board into place.
2
Adhere the tape that secures the power and volume-buttons board to the
computer base.
3
Route the power and volume-buttons board cable through the routing
guide on the computer base.
4
Connect the power and volume-buttons board cable to the I/O board.
5
Adhere the tape that secures the power and volume-buttons board cable
to the computer base.
Post-requisites
1
Follow the procedure from step 4 to step 7 in
2
Replace the battery.
3
Replace the
base
computer. After working inside your
cover.
After working inside your
"Replacing the hard
drive".
59

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: