Replacing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
CAUTION: To avoid damaging the wireless card, do not place any
cables under it.
Align the notch on the wireless card with the tab on the wireless-card
Insert the wireless card at an angle into the wireless-card slot.
Align the screw hole on the wireless card with the screw hole on the I/O
Replace the screw that secures the wireless card to the I/O board.
computer. After working inside your
After working inside your