Navigating The Device Screens; Starting The Device - Philips DreamStation CPAP User Manual

Navigating the Device Screens

The User Interface (UI) on this device allows you to adjust the device settings and view information about your
therapy. The UI is comprised of the display screen and the control dial. Rotate the control dial in either direction to
scroll through the menu options on the display screen.
Note: The display is not a touch screen. You must use the control dial to navigate the device menu.
To adjust a setting:
1. Rotate the control dial to your desired menu option.
2. Press the control dial to select that setting.
3. Rotate the control dial to change the setting.
4. Press the control dial again to save the change.
Note: The rotate dial icon
on any screen indicates to press the dial to perform an action.
Note: Pressing the dial when the down arrow
menu options. Pressing the dial when the up arrow
menu.
Note: The screens shown throughout this manual are examples for reference only. Actual screens may vary based
upon device model and provider settings.

Starting the Device

1. Ensure power is supplied to the device. The first screen to display will be the Philips Respironics logo, followed by
the device model screen, and then the Home screen.
Home Screen
The first time the device is powered on, a pop-up will prompt you to set the time on the device. The default setting
is Greenwich Mean Time, but you may adjust the time in 30 minute increments to match your local time zone. If you
choose to skip this initial time setting, the time can always be adjusted under the "My Setup" menu.
Note: This time setting is not displayed as a clock function on the device. It is only used to align your therapy data
for your Provider's data reports.
2. Put on your mask assembly. Refer to the instructions supplied with the mask.
3. Press the Therapy button (
pressure will display on the screen.
4. Make sure that no air is leaking from your mask. If necessary, adjust the mask and headgear until the air leak stops.
See the instructions provided with your mask for more information.
Note: A small amount of mask leak is normal and acceptable. Correct large mask leaks or eye irritation from an air
leak as soon as possible.
5. If you are using the device in a bed with a headboard, try placing the tubing over the headboard. This may reduce
tension on the mask.
6. Press the Therapy button again to turn off therapy.
Note: During therapy, it there is a mains interruption (i.e. power loss) the device will return to the Home screen
once power is restored. You may resume therapy as needed.
8
on any screen indicates to rotate the dial to perform an action. The click dial icon
appears on any screen will take you to a sub-menu with more
) on top of the device to turn on airflow and begin therapy. The current delivered
appears on any sub-menu will return you back to the main
User Manual