Mirage OMNISAT V2 Owner's Manual

Mirage loudspeakers speaker owners manual omnisat v2
Hide thumbs Also See for OMNISAT V2:

Advertisement

o
w
n
e
r
s
m
a
n
u
a
l
O M N I S A T V 2 S E R I E S
PRINTED IN CHINA
7AI//OMNIS-V2

Advertisement

Table of Contents
loading

Summary of Contents for Mirage OMNISAT V2

  • Page 1 O M N I S A T V 2 S E R I E S PRINTED IN CHINA 7AI//OMNIS-V2...
  • Page 2: Mounting Options

    OMNISAT V2 Satellite downward until it sits in position. When mounting the speaker at a height of over six feet, orient the OMNISAT V2 Satellite in an upside down position so the grill is facing the floor and use the bottom key-way channel. Slide the head of the screw into the wide portion of the channel opening and slide the OMNISAT V2 Satellite downward until it sits in position.
  • Page 3: Specifications

    6. Feed the wires through the hole cut out. (Diagram 11) 7. Connect the wires to the appropriate binding posts at the back of the OMNISAT V2 CC. IMPORTANT: Connect the speaker wire from the positive (RED +) terminal on the amplifier to the positive (RED+) terminal on the speaker.
  • Page 4 OMNISAT V2 Wall Mount Options SAT v ABOVE 6FT BELOW 6FT +/- 15 Degrees *Grill removed to better show orientation...
  • Page 5 7.1 Setup OMNISAT V2 CC Wall Mount...
  • Page 6 OMNISAT V2 CC Table Top Mount...
  • Page 7 notes...
  • Page 8: Warranty

    The warranty is in effect for a period of: 1) for the Speaker Section, five (5) years, and 2) for the Subwoofer, one (1) year, from date of purchase by the original owner from an authorized MIRAGE ®...

This manual is also suitable for:

Omnisat v2 seriesOmnisat v2 fsOmnisat v2 cc

Table of Contents