This is a possible location for the subwoofer to be placed. The OMD-S8, OMD-S10 and OMD-S12 can be faced in many different directions, depending on your particular installation. This is totally acceptable sonically, but there will be some sonic variations as the subwoofers’...
Page 3
AUTO SPIKES Spikes are included with every speaker and are designed to decouple the speaker from the floor. With the speaker upside-down (be sure to protect the -180 +180 speaker surface when doing this), insert the spikes into the threaded insert in the base.
Page 4
The other way to connect your subwoofer to your receiver is using a High-Level (#9) (speaker wire) connection, by simply connecting the speaker wires from the Front Left and Right Speaker Outputs on your receiver to the Left and Right Inputs on the bottom of the subwoofer (#8).
Need help?
Do you have a question about the OMD-S10 and is the answer not in the manual?
Questions and answers