Advertisement
Table of Contents
- 1 Introduction
- 2 Pre-Installation Guidelines
- 3 Configuring KVM/IP Devices to be Kvm.net Enabled
- 4 Connecting the Kvm.net II Manager
- 5 Kvm.net II Manager’s Default Network Parameters
- 6 Logging into the Kvm.net II Web Interface
- 7 Changing the Kvm.net II Manager Network Parameters
- 8 Configuring the Kvm.net II Web Interface
- Download this manual
International HQ
Jerusalem, Israel
Tel: + 972 2 535 9666
minicom@minicom.com
KVM.net
Quick Installation Guide
w w w . m i n i c o m . c o m
North American HQ
Linden, NJ, USA
Tel: + 1 908 486 2100
info.usa@minicom.com
Technical support - support@minicom.com
II
®
European HQ
Dübendorf, Switzerland
Tel: + 41 44 823 8000
info.europe@minicom.com
5UM70157 V2 9/08
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Minicom Central Management Appliance KVM.net II
Summary of Contents for Minicom Central Management Appliance KVM.net II
-
Page 1: Quick Installation Guide
Quick Installation Guide International HQ Jerusalem, Israel Tel: + 972 2 535 9666 minicom@minicom.com Technical support - support@minicom.com KVM.net ® w w w . m i n i c o m . c o m North American HQ Linden, NJ, USA Tel: + 1 908 486 2100 info.usa@minicom.com European HQ... - Page 2 KVM.net II is a robust central management appliance that provides reliable and secure management of KVM IP devices. KVM.net II integrates with Minicom IP devices and Serial console server devices to facilitate an intuitively manageable, centralized out-of-band access portal - designed to maintain all IT assets. KVM.net II centralizes all user account information relevant for IP device administration without interfering in the stand-alone survivability of each device.
- Page 3 KVM.net II Manager’s default network parameters Each KVM.net II Manager unit comes with the following IP address - 192.168.1.250. Subnet mask - 255.255.255.0 Gateway - 192.168.1.1 If these values are not suitable for your network, follow the steps below to display the KVM.net II interface and change the Manager.
- Page 4 QUICK INSTALLATION GUIDE Changing the KVM.net II Manager network parameters 1. Navigate to the Network tab under Settings/Unit Maintenance (see figure below) and change the network parameters to suit your network configuration. Figure 2 Network tab 2. Press Save and restart the KVM.net II Manager. 3.
Need help?
Do you have a question about the Central Management Appliance KVM.net II and is the answer not in the manual?
Questions and answers