3.3
Swapping Op-Amps
1.
Clamp the two sides of an Op-Amp firmly and loosen it from its socket gently.
2.
Lift the Op-Amp vertically upwards and avoid touching other components.
3.
Pick up a new Op-Amp that you want to swap in from the Op-Amp kit.
4.
To avoid reversion, ensure that the half-
moon opening on the op-amp points the
same way as that on the socket.
5.
Place the new Op-Amp vertically downward in the socket and avoid touching
other components.
6.
Press the Op-Amp firmly with the end tips of the clamp until it is completely
seated in the socket.
E9167_DSD Kit_QSG.indd 5
ASUS Op-Amp Swap Guide
5
2014/3/28 9:00:41