Spinning; Maximum Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele PW 5062 Operating And Installation Instructions

Table of Contents

Advertisement

Maximum final spin speed

Programme
Cottons
Minimum iron
Intensive wash
Delicates
Woollens
Quick wash
Separate rinse
Drain/Spin
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.

Rinse and interim spin

There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed.

To omit the final spin (Rinse hold)

^ Select the Rinse hold setting. The
rpm
laundry will not be spun and will
1400
remain suspended in the final rinse
1000
water. This reduces creasing if the
1400
laundry is not going to be removed
600
from the drum immediately after the
1200
end of the programme.
1400
– To start the final spin:
1400
1400
The machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the Start button.
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit the spin between rinses and
the final spin
^ Select the Without spin setting. The
laundry is not spun after the final
rinse. The water will drain away and
the machine will go straight into the
anti-crease stage.

Spinning

19

Advertisement

Table of Contents
loading

Table of Contents