System Memory - Asus H110M-D D3 User Manual

1.4

System memory

1.4.1 Overview
This motherboard comes with two Double Data Rate 3 (DDR3) Dual Inline Memory Module
(DIMM) sockets. The figure illustrates the location of the DDR3 DIMM sockets:
H110M-D D3
H110M-D D3 240-pin DDR3 DIMM sockets
1.4.2 Memory configurations
You may install 1 GB, 2 GB, 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR3 DIMMs into
the DIMM sockets. You can refer to the recommended memory population below.
• You may install varying memory sizes in Channel A and Channel B. The system maps
the total size of the lower-sized channel for the dual-channel configuration. Any excess
memory from the higher-sized channel is then mapped for single-channel operation.
• According to Intel
the CPU.
• Due to the memory address limitation on 32-bit Windows
or more memory on the motherboard, the actual usable memory for the OS can be
about 3GB or less. For effective use of memory, we recommend that you do any of the
following:
-
-
-
ASUS H110M-D D3
CPU spec, DIMM voltage below 1.65V is recommended to protect
®
Use a maximum of 3 GB system memory if you are using a 32-bit Windows
I nstall a 64-bit Windows
®
motherboard.
F or more details, refer to the Microsoft
com/kb/929605/en-us.
OS if you want to install 4GB or more on the
support site at http://support.microsoft.
®
OS, when you install 4GB
®
®
OS.
1-7