Advertisement
Quick Links
Carcam.ie G-800 Dual Mirror Camera – incorporating Reverse Parking Function
Thank you for purchasing this high definition rear view mirror dual car camera. This is a
high quality and stylish product which should not adversely affect the original look of
your car.
The device is a professional high definition car camera, with dual front & rear cameras
and the addition of an automated car reversing function. It can record high resolution
video and take super clear pictures and store these to the 32GB Class 10 Micro SD Card
as supplied by Carcam.ie.
This manual includes the usage, specification and notes about the device. Read it carefully
before using the product to ensure you get the most from it and keep the user manual safe
for future reference. Carcam.ie will also keep a copy of the manual on our website.
If after reading the manual, you are unsure about any function or operation of the camera,
contact
support@carcam.ie
phone to assist you.
Accessories：
Fixing Belts X 2
Cable for Connection to Car Reversing Circuit X 1 Car Charger X 1
USB Cable X 1
Installation & User Manual
with your problem and one of our staff will reply by email or
Car Rear Camera X 1
User Manual X 1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Carcam G-800
Summary of Contents for Carcam G-800
- Page 1 Carcam.ie will also keep a copy of the manual on our website. If after reading the manual, you are unsure about any function or operation of the camera, contact support@carcam.ie...
- Page 2 1. Product Features 1. Adjustable 170 degree ultra-wide angle front lens. 2. The rear camera will work automatically once plugged in. 3. When the ignition is switched on, the device will automatically turn on and begin to record. 4. Seamless loop recording means the device will not miss any data while driving. 5.
- Page 3 9. Micro SD Card Slot 10. AV Interface 11. USB/Charging 12. Speaker 13. Reset Button 14. Back Holder 15. LED fill in light 16. Lens Button Function ： Long press to turn on/off. When powered up, short press to turn on/off infrared ON/OFF Button fill in light.
- Page 4 3．Specification 1.2M CMOS Sensor, Motion Built-in Sensitive Motion CMOS 1/4 inch Light-sensing detection Detection Surface Area Three-dimensional Dual lens, 170 degree Gravity Lens Vibration Sensor, Save the ultra-wide angle lens. sensor Recording Video 4.3inch high definition Built-in Audio LCD screen Microphone/Speaker(AAC) Seamless continuous recording.
-
Page 5: Front Camera Installation
Fixing Belts Installation Front Camera Installation 1. Fix the car camera to the original car's rear-view mirror. Check the position of the 12v charger socket and if that is positioned to one side of the dash then run the cable in this direction from the mirror (shortest route). -
Page 6: Rear Camera Installation
Rear Camera Installation 1. Insert the back camera into the camera port. Decide your route for the cable and it may be possible to use some of the same route as the car charger cable, or you may decide to run the rear camera cable down the other side of the windscreen. -
Page 7: System Menu
5．System Menu The System Menu can only be accessed in stand-by mode. When the camera is powered up, press the Menu button immediately to access System Menu before the camera starts recording. If the camera has started recording, press the OK button to stop the recording and then press Menu to access the System Menu. - Page 8 Similarly if you felt the images were too bright as in summer you have the option to close the lens using the – settings. The default setting is 0 and Carcam.ie has found this very effective and any other setting chosen is by your personal choice. Options are: -3 / -2 /-1 / 0 / +1 / +2 / +3.
- Page 9 The setting are: Open (on) or Off, with the factory default; Off. However, Carcam.ie has set this to open (on) and this setting can be left on and it will have no negative effect on the normal camera recording cycle.
-
Page 10: Playback Functions
13. Sensor light ：The Sensor Light is a bank of LEDs around the front camera lens, designed to offer assistance in night recording where there is poor ambient light. The options are; Off/ Open (on continuously) or Auto with the default setting of Auto. 14. - Page 11 DISPLAYS, CAMERA & PLAYBACK FUNCTIONS. (A) RECORDING DISPLAY Start recording & video time runs (B) CAMERA FUNCTION In Standby State (camera not recording) – Press Mode Button. Hint: Remember the camera starts recording a couple of seconds after power on and to stop recording and return it to stand-by state press the OK button.
- Page 12 1. Please confirm whether the Micro SD card is installed correctly in the device 2. If you are using an SD Card other than that supplied by Carcam.ie, check the storage speed of the card? The camera requires a Micro SD Card – Class 10 – UHS 1- 300X or higher.
- Page 13 8．Warning 1. The device is a precision electronic product. Do not drop, shake or shock violently. Do not disassemble or the warranty will be invalidated. 2. When charging the device, please make sure the power and car charger are stable. Over voltage and over current will damage the device.
Need help?
Do you have a question about the G-800 and is the answer not in the manual?
Questions and answers