RCA MRM400 Instruction Manual page 43

set in advance.
4. Push [DSC] to enter the standby condition
for Position Report Call.
- Channel 70 is selected and "READY" appears.
5. Push [DSC] to transmit the Position Report
Call.
MRM400 VHF Marine Two-Way Radio Instruction Manual
TM
Copyright © 2015 RCA Communications Systems
6. After the Position Report Call has been
transmitted, stand by on Channel 70 until an
acknowledgement is received.
- "WAIT ACK" scrolls at the Channel Comment
Indicator.
7. Push any key to exit the function and return
to the normal operation.
■ Receiving a Position Request Call
While monitoring Channel 70 and a Position
Request Call is received:
1. "DSC" appears and "RCV POS REQUEST"
scrolls at the Channel Comment Indicator.
2. Push any key to stop the beep.
Scrolls
43