Emerson Avocent HMX Installer/User Manual page 15

High performance kvm extender system
Table of Contents

Advertisement

15. If you selected the Enable Serial checkbox, enter the baud rate, data bits, stop bits and parity
information.
16. Click Update Now .
To configure the receiver:
1. From a web browser on your local computer, enter the receiver IP address. The default IP
address is: http://169.254.1.32.
NOTE: If the IP address of the receiver is not known, perform a manual factory reset to restore the default
IP address.
2. Log in to the System Configuration utility. The default username is admin and the default
password is password .
3. The first time that you log in to the utility using the administrator account, you are required to
reset the password. Select Security on the left side of the page.
4. In the appropriate fields, enter the old password. Then, enter your new password twice to
verify and click Save .
5. Select System Configuration on the left side of the page. On the page that appears, enter the
name and a description of the transmitter in the appropriate fields.
6. Ensure that the Enable System Port checkbox is selected. Then, change the IP address to an
address in the private IP range 192.168.xxx.xxx.
7. Change the netmask to 255.255.255.0 .
8. Change the System Gateway to an appropriate address.
9. If using a dual-head receiver, ensure the Enable Management Port checkbox is selected.
Then, enter 192.168.1.42 as the IP address.
NOTE: It is recommended that the IP address of this port remains the same. If you wish to change it, use
the new address for all dual-head extenders in the system.
10. If using the Teaming port, ensure the Enable Teaming Port checkbox is selected. Then,
change the Teaming Port IP Address to an appropriate address in the private IP range
192.168.xxx.xxx.
11. In the Teaming Port Netmask field, change the netmask to 255.255.255.0 .
12. In the Teaming Port Gateway field, change the Teaming Gateway to an appropriate address.
13. Verify the data streams Enable Video, Enable Audio, Enable USB and Enable Serial are
enabled as appropriate. Select your applicable keyboard country code.
Installation and
Configuration.....
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents