Mitsubishi Electric PAR-WT40R-E Installation And Setting Manual page 6

Remove the four screws to remove the electrical box cover.
Screws
(2 positions)
Remove the two screws to pull the electrical box so that the electrical box is swung toward
you from right.
Electrical box
Run the receiver's cable into the cylinder unit
through the left-most opening on top of the
unit.
Do not run the receiver's cable through an
opening that a power cable goes through
and do not bundle the cable together with a
power cable.
5
Electrical box cover
Screws
(2 positions)
Screws
(2 positions)
Electrical box