Mitsubishi Electric PAR-WT40R-E Installation And Setting Manual page 3

The device must be installed by a
dealer or an authorised technician ac-
cording to the appropriate installation
manual.
Do not place the device in an environ-
ment that exposes it to large amounts
of vapor or condensation.
►Wiring
The wireless receiver's maximum volt-
age is 12V DC. Do not connect 230V
AC power source to the wireless re-
ceiver.
Connections must be made securely
and without tension or external force
on the terminals.
►Others
Do not use sharp objects to press the
buttons.
Do not touch or operate the device with
wet hands.
Do not wash the device with water or
solution or the like.
When installing or repairing the device,
ask a dealer or a qualified technician.
Do not disassemble or modify.
Do not drop the device.
Install the device in a place capa-
ble of bearing its own weight .
Disposal
This symbol mark is for EU countries only.
This symbol mark is according to the directive 2002/96/EC Article 10 Information for us-
ers and Annex IV, and/or to the directive 2006/66/EC Article 20 Information for end-users
and Annex II.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materi-
als and components which can be recycled and/or reused. This symbol means that electrical
and electronic equipment, batteries and accumulators, at their end-of-life, should be disposed
of separately from your household waste. If a chemical symbol is printed beneath the symbol,
this chemical symbol means that the battery or accumulator contains a heavy metal at a cer-
tain concentration.
This will be indicated as follows: Hg: mercury (0.0005%), Cd; cadmium (0.002 %), Pb: lead (0.004%)
In the European Union there are separate collection systems for used electrical and electronic products,
batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your local community waste col-
lection/recycling centre.
Please, help us to conserve the environment we live in!
Warning
If the device is installed improperly, electric shock
or fire could result.
Electric shock, fire, or breakdown could result.
Breakdown, ignition, or fire could result.
If connections are made improperly, breaking of
wire, heat generation, or fire could result.
Electric shock or breakdown may result.
Electric shock or breakdown may result.
Electric shock or breakdown may result.
If the device is not installed properly, electric
shock, smoke generation, or fire could result from
entry of dust or water.
Caution
This could break the case or affect the device enough
to make it inoperable.
If the device is not installed securely or properly, the
wireless receiver may fall.
2