Displaying Or Hiding The Room Temperature - Mitsubishi Electric PAR-WT40R-E Installation And Setting Manual

5.5. Displaying or Hiding the Room Temperature (Mode No. : 4)
Select either displaying or hiding the room tem-
perature.
Press the or
hiding the room temperature, and press the
button to save the setting.
Displaying :The set temp. display shows the
actual space temperature.
Hiding :The set temp.display shows
"
When the indoor unit is operating, the room tem-
perature display shows the actual space tempera-
ture (18°C) and the set temperature (20°C) as
shown in the figure to the right. The measurable
temperature ranges from 0°C to 40°C.
If the measured room temperature is out of
0°C to 40°C range, the room temperature
display blinks.
The wireless remote controller that is installed with a bracket may not be able to cor-
rectly detect the room temperature due to being affected by the wall temperature.
Perform a test run and place the remote controller where the room temperature can be
correctly detected.
15
button to select displaying or
".
<Displaying>
<Hiding>