Stake Out Function - Makita LD060P User Manual

Hide thumbs Also See for LD060P:

Instruction manual (299 pages)

User manual (27 pages)

Instruction manual (43 pages)

Table Of Contents

Table of Contents

Available languages

•

All target points must be vertical or horizontal on

the surface of the wall.

•

The best results are achieved when the intrument

is rotated around a fixed point (e.g. the stop

bracket is fully extended and the instrument is

placed against a wall).

•

To take the measurement, the minimum/

maximum function can be called up. The minimum

value is used for measurements that must be at

right-angles to the target; the maximum distance

is used for all other measurements.

Make sure that the first measurement and the

distance to be measured are at right angles. Use the

minimum/maximum function.

Indirect measurement - determining a

distance using 2 auxilliary measurements

See drawing {G}

3x briefly: the

The distance to be measured flashes in the symbol.

1x briefly: takes a measurement of the distance

The second distance to be measured flashes in the

symbol

1x briefly: takes a measurement of the hori-

zontal distance

The result of the function is displayed in the summary

row.

If the

button is pressed for along time while

Makita LD060P

symbol is displayed.

measuring a distance, maximum or minimum conti-

nuous measuring is activated.

Indirect measurement - determining a

distance using 3 auxilliary measurements

See drawing {H}

4x briefly: the

The distance to be measured flashes in the symbol.

1x briefly: takes a distance measuement

The second distance to be measured flashes in the

symbol

1x briefly: takes a horizontal measurement.

The third distance to be measured flashes in the

symbol

1x briefly: takes a measurement of the distance

The result of the function is displayed in the summary

row.

If the

button is pressed for along time while

measuring a distance, maximum or minimum conti-

nuous measuring is activated.