Onboard Devices Configuration; Serial Port Configuration; Apm Configuration - Asus H110I-PLUS D3 User Manual

Hide thumbs Also See for H110I-PLUS D3:
Table of Contents

Advertisement

2.6.7

Onboard Devices Configuration

HD Audio Controller [Enabled]
[Enabled]
Enables the HD Audio Device.
[Disabled]
Disables the HD Audio Device.
The following item appears only when you set the HD Audio Controller item to [Enabled].
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or
high‑definition audio depending on the audio standard that the front panel audio
module supports.
[HD Audio]
[AC97]
Realtek LAN Controller [On]
[On]
Enables the Realtek LAN controller.
[Off]
Disables the controller.
Realtek PXE Option ROM [Off]
This item appears only when you set the previous item to [On] and allows you to enable or
disable the PXE OptionRom of the Realtek LAN controller. Configuration options: [On] [Off]
Charging USB devices in Power State S5 [Disabled]
[Enabled]
Charges USB devices even when the system is in Power State S5. State
S5 is the soft‑off mode or shutdown state where your computer has no
memory state and is not doing any computing tasks.
[Disabled]
Disables this function.

Serial Port Configuration

The sub‑items in this menu allow you to set the serial port configuration.
Serial Port [On]
Allows you to enable or disable the serial port (COM).Configuration options: [On] [Off]
Change Settings [IO=3F8h; IRQ=4]
This item appears only when you set the Serial Port to [On] and allows you to select
the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h;
IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
2.6.8

APM Configuration

Deep S4 [Disabled]
When the system enters the S4 state and this item is set to [Enabled], the system will be put
to deep S4 sleep state to reduce power consumption. The system in deep S4 state can only
be woken up via the power button. Configuration options: [Disabled] [Enabled]
ASUS H110I-PLUS D3
Sets the front panel audio connector (AAFP) mode to high definition
audio.
Sets the front panel audio connector (AAFP) mode to legacy AC'97
2‑27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents