Specifications - Sony UP-D23MD Manual

Specifications

Power requirements
100 to 120 V AC, 50/60 Hz
(for 100 to 120 V AC users)
220 to 240 V AC, 50/60 Hz
(for 220 to 240 V AC users)
Input Current 1.8 A max. at 25 °C
(for 100 to 120 V AC users)
1.0 A max. at 25 °C
(for 220 to 240 V AC users)
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
20% to 80% (no condensation allowed)
Operating pressure
700 hPa to 1,060 hPa
Storage and transport temperature
–20 °C to 60 °C (–4 °F to 140 °F)
Storage and transport humidity
20% to 80% (no condensation allowed)
Storage and transport pressure
700 hPa to 1,060 hPa
Dimensions Approx. 212 × 125 × 395 mm (w/h/d)
(8 3/8 × 5 × 15 5/8 inches)
Mass Approx. 6.5 kg (14 lb 5 oz)
Printing system Sublimation heat transfer printing
Printable pixels When using the UPC-21S and printing
the full-image: 1520 × 1144 dots
When using the UPC-21L and printing
the full-image: 2000 × 1520 dots
Total gradation 256 levels each for yellow, magenta,
and cyan
Printing time When using the UPC-21S:
When the printer is set to high
speed: Approximately 19 seconds
When using the UPC-21L:
When the printer is set to high
speed: Approximately 29 seconds
Thermal head 15.87 dots/mm
(USB) connector
Universal Serial Bus (USB)
Specification Revision 2.0
Input connector AC IN (for power input)
Supplied accessories
Paper tray (1)
USB cable 1-824-211-41(Sony) (1)
Thermal head cleaning cartridge (1)
Stopper (1)
Software License Agreement (1)
Before Using this Printer (1)
CD-ROM (1)
Optional accessories
UPC-21L Color Printing Pack
UPC-21S Color Printing Pack
8
Specifications
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of
water:
Ordinary
Degree of safety in the presence of a
flammable anesthetic mixture with
air or with oxygen or nitrous oxide:
Not suitable for use in the presence
of a flammable anesthetic mixture
with air or with oxygen or nitrous
oxide
Mode of operation:
Continuous
Design and specifications are subject to change without
notice.