Installing Exhaust Pipe; Connecting The Battery - Miller Electric 250 Owner's Manual

5-2. Installing Exhaust Pipe

Tools Needed:
1/2 in

5-3. Connecting the Battery

Tools Needed:
1/2 in
.
A complete Parts List is available at www.MillerWelds.com
!
Stop engine and let cool.
!
Do not blow exhaust toward
right side of unit where air inlet
is or air cleaner may require
frequent service. Point ex-
haust pipe in desired direction
but always away from front
panel and direction of travel.
!
Connect negative (−)
cable last.
804 250-A / Ref 228 647 / Ref. S-0756-D
804 196-A / Ref. 228 647-A
−
+
OM-217 455 Page 15