Troubleshooting; Technical Specifications - Kärcher MV 5 Manual

Warning
Do not use abrasives, glass or univer-
sal cleaners! Never immerse the appli-
ance in water.

Clean the appliance and accessory
parts made of plastic with a com-
mercial plastic cleaner.

If required, rinse the container and
accessories with water properly
and dry them before reuse.
Clean flat fold filter
Recommendation: Clean the filter
box after every use.
Illustration

Unlock, fold out and remove the fil-
ter cartridge, empty dirt from the fil-
ter cartridge over a waste bin.

In order to clean the inserted flat
fold filter, knock the filter box
against the edge of the waste bin. It
is not necessary to remove the flat
fold filter from the filter box.
If necessary, clean the flat fold filter
separately.
Illustration

Unlock, fold out and remove the fil-
ter cartridge.
Illustration
H
2

Remove the flat fold filter from the
filter box and tab it out.

When necessary, clean under run-
ning water only, do not wipe or
brush down.
Allow to dry completely prior to use.

Finally, reinstall the dry flat fold filter
into the appliance. Insert the filter
cartridge into the appliance.

Troubleshooting

Decreasing cleaning power
If the suction power becomes less,
check the following points:

Accessories, suction hose or suc-
tion pipes are clogged, please re-
move the obstruction using a stick.
Illustration

Filter bag is full: Insert new filter
bag.
Illustration
H

Flat fold filter contaminated: Re-
move the filter box and clean filter
(see Chapter "Cleaning the flat fold
filter").

Replace damaged flat fold filter.

Technical specifications

The Specifications are listed on page
IV. The following is an explanation of
the symbols.
Voltage
Output P
Max. connection output of
appliance socket
Mains fuse (slow-blow)
Container capacity
Water intake with handle
Water intake with floor nozzle
Power cord
Sound pressure level (EN
60704-2-1)
Weight (without accessories)
Subject to technical modifications!
EN
– 12
2
nom
23