Switching The Power; Adjusting Display Settings; External Controls - Acer AL1712 User Manual

Switching the Power

First, switch the power on to the monitor, then switch the power on to the computer.
When you see the LED on the power button go green, this indicates the computer is
ready for use. Allow about 10 seconds for the video signal to appear. If you do not see
the green light on the power button or a video signal, check the connections.

Adjusting display settings

External Controls

1. AUTO
<
2 MINUS
>
3 PLUS
4 OSD Function
5
POWER
Notice: & are only suitable for models with speakers.
4
1 2
3 4 5
< >
AUTO MENU
If OSD is active, press to exit a selection in
OSD. If OSD is inactive, press and the monitor
will automatically optimize the position, focus
and clock of your display.
If OSD is active, press to select or adjust OSD
options. If OSD is inactive, press once, then
press the buttons marked < or > to adjust the
volume.
If OSD is active, press to select or adjust OSD
options. If OSD is inactive, press once, then
press the buttons marked < or > to adjust the
volume.
Press to view OSD.
Press again to enter a selection in OSD.
Power on/off
Green: power on
Orange: in sleep mode