Managed 8 & 9 port switches, eight 10/100base-tx ethernet ports plus one 100base-fx port / eight 10/100base-tx ethernet ports plus one 1000base-sx port / eight 10/100base-tx ethernet ports (88 pages)
Page 2
In no event shall MiLAN Technology be liable for incidental or consequential damages, costs, or expenses arising out of or in connection with the performance of the product delivered hereunder.
Gigabit Ethernet ports that can significantly improve your network backbone performance. This Switch will fit into any enterprise level network to act as an exit to the backbone switch. It also provides 2 SFP Gigabit port for gigabit network connection.
The 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch User Guide Compare the contents of your 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch package with the standard checklist above. IF any item is missing or damaged, please contact your local dealer for service.
440 x 224 x 44 mm (W x D x H) Front Panel The Front Panel of the 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch consists of 24 x auto-negotiation 10/100/1000Mbps Ethernet RJ-45 connectors (support Automatic MDI/MDIX function), two Combo SFP Slots slot, and LED-indicators (100/1000, Link/Activity, Full duplex/Collision) for each Gigabit port and power LED-indicator for unit.
The 3-pronged power plug, on/off switch, and Ventilation fan are located at the rear Panel of the 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch as shown in Figure 2-2. The Switch will work with AC in the range 100-240V AC, 50-60Hz.
Blinking Table 2-1. The Descriptions of LED Indicators Combo SFP Slots LED 2 Combo SFP Slots ports have two LED indicators – LNK and ACT. The following table provides descriptions of LEDs status and their meaning. Figure 2-4. Combo SFP Slots port LED Indicators Status Green Green...
Switch from shock/vibration. Power On Connect the cord of power adapter to the power socket on the rear panel of the Switch. The other side of power cord connects to the power outlet. Check the power indicator on the...
This section provides you one sample of network topology in which the 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch is used. In general, the 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch is designed as a high-bandwidth backbone switch.
(e.g., a network adapter card on the attached device), network cable, or switch port is defective or not. Verify that the switch and attached device are power on. Be sure the cable is plugged into both the switch and corresponding device. Verified the proper cable type is used and its length does not exceed specified limits.
6. Technical Specification The following table provides the technical specification of the 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch. Standard Protocol Technology Transfer Rate Connector MAC Address Memory Buffer Network Cable Power Supply Power IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3z Gigabit fiber...
Page 13
Consumption Operation 0 to 45 (32 to 113 ) Temperature Operation 10% to 90% (Non-condensing) Humidity Dimension 440mm(W) x 224mm(D) x 44mm (H) EMI & Safety FCC Class A, CE, UL, CE/EN60950 1329 Moffett Park Drive Sunnyvale, CA 94089...