Transition Networks HB-E-TX-8 User Manual
  1. Manuals
  2. Brands
  3. Transition Networks Manuals
  4. Switch
  5. HB-E-TX-8
  6. User manual

Transition Networks HB-E-TX-8 User Manual

100base-tx 8-port hub
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
™
LAN Master TX8
100BASE-TX 8-Port Hub
(
)
HB-E-TX-8
33013.C
For assistance in installing, using, or
maintaining the TRANSITION Networks
LAN Master™ TX8 100BASE-TX 8-Port
Hub, contact TRANSITION Networks
Technical Support
at:
(800) 260-1312
or contact your local distributor.
17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HB-E-TX-8 and is the answer not in the manual?

Questions and answers

Related Manuals for Transition Networks HB-E-TX-8

Summary of Contents for Transition Networks HB-E-TX-8

  • Page 1 ™ LAN Master TX8 100BASE-TX 8-Port Hub HB-E-TX-8 33013.C For assistance in installing, using, or maintaining the TRANSITION Networks LAN Master™ TX8 100BASE-TX 8-Port Hub, contact TRANSITION Networks Technical Support (800) 260-1312 or contact your local distributor.

  • Page 2: Warranty

    CAUTION: RJ connectors are NOT INTENDED FOR CONNECTION TO THE PUBLIC TELEPHONE NETWORK. Failure to observe this caution could result in damage to the public telephone network. Der Anschluss dieses Gerätes an ein öffentlickes Telekommunikationsnetz in den EG-Mitgliedstaaten verstösst gegen die jeweligen einzelstaatlichen Gesetze zur Anwendung der Richtlinie 91/263/EWG zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über Telekommunikationsendeinrichtungen...

  • Page 3: Table Of Contents

    100BASE-TX Cable and Connector Specifications The physical characteristics of the 100BASE-TX cable must meet or exceed IEEE 802.3u 100BASE-TX specifications. 100BASE-TX CABLE SPECIFICATIONS Category 5 wire or better is required. Either shielded twisted pair (STP) or unshielded twisted pair (UTP) can be used. DO NOT USE FLAT OR SILVER SATIN WIRE.

  • Page 4: Introduction

    (LAN) operations, including familiarity with communications protocols used on interconnected LANs, is assumed. The LAN Master™ TX8 Hub The LAN Master™ TX8 100BASE-TX 8-Port Hub (HB-E-TX-8) is a Fast Ethernet repeater designed to meet IEEE 802.3u 100BASE-TX standards. LAN Master™ TX8 Hub Features •...

  • Page 5: Networking The Lan Master™ Tx8 Hub

    The sole purpose of this remedy shall be provided the customer with the replacement or repair of non-conforming goods in the manner described in this Warranty statement. This exclusive remedy shall not be deemed to have failed of its essential purpose so long as TN is willing and able to repair or replace the defective item(s) or refund the purchase price.

  • Page 6: Lan Master™ Tx8 Hub Connectors And Status Leds

    LAN Master™ TX8 Connectors and Status LEDs RJ-45 Connectors Eight (8) 100BASE-TX RJ-45 connectors are located at the front of the LAN Master™ TX8. The RJ-45 jacks support connection to Category 5 shielded or unshielded 100 ohm twisted pair 100BASE-TX cable. Power Connector An external power connector is located at the back of the LAN Master™...

  • Page 7: Site Considerations

    5. MAINTENANCE WARNING: DO NOT, UNDER ANY CIRCUMSTANCES, open and attempt to repair the LAN Master™ TX8 100BASE-TX 8-Port Hub. Failure to observe this warning could result in personal injury or death from electrical shock. NOTE: Failure to observe the above warning will immediately void the warranty.

  • Page 8: Installation

    Unpacking the LAN Master™ TX8 The LAN Master™ TX8 packing contents should include the following: Item Part Number LAN Master™ TX8 HB-E-TX-8 Power Cord 3344, 3347, 3348, 3349, or 3523, (depending upon power configuration in country where installed) User’s Guide 33012 4.

  • Page 9: Installing Lan Master™ Tx8 In 19-Inch Rack

    Connecting Power to LAN Master™ TX8 To power ON the LAN Master™ TX8: 1. Locate the power receptacle on the back of the LAN Master™ TX8. 2. Connect the LAN Master™ TX8 power connector end of the power cord to the LAN Master™ TX8. 3.

  • Page 10: Connecting 100Base-Tx Cable

    Optionally Cascading Two LAN Master™ TX8 Hubs Two LAN Master™ TX8 hubs can be cascaded using the two connections at the front of each hub that are labelled ‘Port 8’. To cascade two LAN Master™ TX8 hubs: 1. Locate or build 100BASE-TX cable with the following characteristics: •...

This manual is also suitable for:

Lan master tx8

Table of Contents