Download  Print this page

Transition Networks NDM-FTX-XX-01 User Manual

Fast ethernet fiber/dual media nics / 10/100base-tx and/or 100base-fx
Hide thumbs
   

Advertisement

NDM-FTX-xxxxx-01
critical applications. These NICs come in standard and low profile form factors, and
include driver support for a variety of operating systems.
Part Number
Port One - Copper
10/100Base-TX
NDM-FTX-ST-01
RJ-45
NDM-FTX-ST-01(L)
100 m (328 ft)*
NDM-FTX-SC-01
RJ-45
100 m (328 ft)*
NDM-FTX-SC-01(L)
NDM-FTX-MT-01
RJ-45
NDM-FTX-MT-01(L)
100 m (328 ft)*
NDM-FTX-SC5-01
RJ-45
100 m (328 ft)*
NDM-FTX-SC5-01(L)
NDM-FTX-SC20-01
RJ-45
100 m (328 ft)*
NDM-FTX-SC20-01(L)
NDM-FTX-SB201-01
RJ-45
100 m (328 ft)*
NDM-FTX-SB201-01(L)
NDM-FTX-SB202-01
RJ-45
NDM-FTX-SB202-01(L)
100 m (328 ft)*
Optional accessories sold separately
Part Number
Description
BTR-NDM-RPL
RPL, Bootable ROM Chip
BTR-NDM-PXE
PXE, Bootable ROM Chip
*Typical maximum cable distance.
Actual distance is dependent upon the
physical characteristics of the network
installation.
USER'S GUIDE
NDM-FTX-xxxxx-01 (standard)
NDM-FTX-xxxxx-01(L) (low profile)
Fast Ethernet Fiber/Dual Media NICs
Fast Ethernet
• Copper and Fiber
• 10/100Base-TX and/or 100Base-FX
Transition Networks NDM-FTX series
fast Ethernet dual media NIC (Network
Interface Card) provides a 10/100Base-
TX copper port and a 100Base-FX fiber
port for installation flexibility in a
mixed-media environment. The dual
ports can also provide redundancy for
Port Two - Duplex Fiber-Optic
100Base-FX
ST, 1300 nm multimode
2 km (1.2 miles)*
SC, 1300 nm multimode
2 km (1.2 miles)*
MT-RJ, 1300 nm multimode
2 km (1.2 miles)*
SC, 1310 nm single mode
5 km (3.1miles)*
SC, 1310 nm single mode
20 km (12.4 miles)*
SC, 1310 TX/1550nm RX single
mode, single fiber 20 km (12.4 miles)*
SC, 1550 TX/1310 nm RX single
mode, single fiber 20 km (12.4 miles)*
Installation . . . . . . . . . . . . . . . . . . .2
Cable Specifications . . . . . . . . . . .4
Technical Specifications . . . . . . . .5
Troubleshooting . . . . . . . . . . . . . . .6
Contact Us . . . . . . . . . . . . . . . . . . .7

Advertisement

Table of Contents
loading

  Related Manuals for Transition Networks NDM-FTX-XX-01

  Summary of Contents for Transition Networks NDM-FTX-XX-01

  • Page 1 USER’S GUIDE NDM-FTX-xxxxx-01 NDM-FTX-xxxxx-01 (standard) NDM-FTX-xxxxx-01(L) (low profile) Fast Ethernet Fiber/Dual Media NICs Fast Ethernet • • Copper and Fiber • 10/100Base-TX and/or 100Base-FX Transition Networks NDM-FTX series fast Ethernet dual media NIC (Network Interface Card) provides a 10/100Base- TX copper port and a 100Base-FX fiber port for installation flexibility in a mixed-media environment.
  • Page 2: Installation

    NDM-FTX Series Fast Ethernet Dual Media NIC Installation Checklist Before installing the NDM-FTX, verify that the package contains the following items: • NDM-FTX Board • LAN Driver CD Please notify your sales representative if any item is missing or damaged. Description The NDM-FTX module has a bootable ROM socket (ROM chip sold separately).
  • Page 3: Technical Specifications

    NDM-FTX Series Fast Ethernet Dual Media NIC Cable Specifications Copper cable 10BASE-T UTP Category 3, 4, 5 or higher 100Base-TX UTP Category 5 or higher Gauge: 24 to 22AWG Attenuation: 22.0 dB /100m @ 100 MHz • Straight-through MDI twisted-pair cable must be used. •...
  • Page 4: Troubleshooting

    NDM-FTX Series Fast Ethernet Dual Media NIC Troubleshooting Diagnostics LEDs and Boot ROM LEDS The LINK/ACT LED lights when a fiber cable or twisted pair cable connection is good. It blinks to indicate activity. The collision and full-duplex LED report board operating status. Boot ROM To add the remote boot feature to a workstation, insert the Boot ROM into the ROM socket.
  • Page 5: Compliance Information

    Compliance Information CISPR22/EN55022 Class A, CE Mark, CISPR22/EN55022 Class A + EN55024, CE Mark FCC regulations This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This manual is also suitable for:

Ndm-ftx-mt-01(l)Ndm-ftx-sb201-01(l)Ndm-ftx-sb202-01(l)Ndm-ftx-sc-01(l)Ndm-ftx-sc20-01(l)Ndm-ftx-sc5-01(l) ... Show all