Id Address; Special Settings; A Ctivate The Password; Whites Setting - Expolite tourled 36 cw/ww User Manual

3.7

ID ADDRESS

MODE
Id
3.8

SPECIAL SETTINGS

MODE
SET
3.9

A CTIVATE THE PASSWORD

MODE
PASS
3.10

WHITES SETTING

MODE
CALI
3 DISPLAY PANEL OPERATION
I(001~066)
ID
Enter the ID mode to set the ID ADDRESS.
UPLd
REST
IdON
SETTING
Select Upload to upload the custom programs from the current MASTER unit to
the SLAVE units.
In order to activate the upload function the password must be entered.
Password is the same as the main access password.
When uploading the MASTER and SLAVE units will be full on..
If an error occurs when uploading the MASTER and/or SLAVE units will display
Warm White..
On successful uploading of the custom programs the MASTER and SLAVE units
will display Cool White.
In order to reset custom modes to default values select
Enter ID ON/OFF in order to allow/disallow ID address function from the
DMX512 controller.
ON
OFF
KEYLOCK
Enter the KEYLOCK mode to select whether the access password is on or off.
In order to enter access password it is necessary to first press SET .
Access password is UP + DOWN + UP + DOWN .
W1
W2
W8
CALIB
Enter the CALIB to select white color of different color temperature.
There are 8 pre-programmed White colors can be edited
by using Cool white & Warm white
PASS
PASS
ON
OFF
C.(0~255)
W.(0~255)
.
9
SENd ENd
REST
PESET Parameter .
2008.9.19