The Display Shows A Fault Message - Miele Touchtronic W 3033 Operating And Installation Instructions

The display shows a fault message

Issue
q
Drain fault
Check drain
p
Water inlet fault
Open water faucet
o
Waterproof system
activated
,
Technical fault
Call Technical Service
In the display flashes
Anti-crease
alternating with
Check detergent
1) To turn off the fault message:
^ To turn the fault message off: Open the drum door or press the "Cancel" button
until the fault message goes out.
Frequently asked questions
Possible fault
– The drain is
blocked.
– The drain hose is too
high.
– The water intake is
blocked.
The waterproof system
has activated.
There is a fault.
The machine has
oversudsed.
1)
Fix
– Clean the drain filter and
the drain pump.
– The maximum drain
pump height is 3 ft (1m).
Possible fault:
– check if the water supply
is open all the way.
– the inlet hose is kinked.
Call Technical Service.
Restart the program.
If the fault message
appears again contact
Technical Service.
Use less detergent in the
next wash program, and
follow the recommended
amount on the detergent
packaging.
33