Problem Solving Guide - Miele NOVOTRONIC W 1918 Operating Instructions Manual

Problem solving guide

Any work done on the electrical components of this appliance should
only be performed by a qualified and trained person in accordance with all
local and national codes and regulations. Unauthorized repairs may result
in personal injury and damage to the machine.
What to do if, . . .
. . . The programme does not
start?
. . . The "Check p / q"
indicator lamps are flashing?
Cause . . .
There is no power.
The "ON" indicator lamp has
not lit up.
There is power and the "ON"
indicator lamp is on, but the
programme selector has not
been turned to the "Start/Finish"
position.
The "Check p" indicator lamp
is flashing, and the programme
has started.
The water inlet is blocked.
The "Check q" indicator lamp
is flashing.
The drain is blocked.
Problem solving guide
Remedy . . .
Check that..:
–
the door is properly closed.
–
the machine is plugged in.
–
the fuse or circuit breaker
has not tripped.
–
Turn the programme selector
to the "Start/Finish" position.
–
Select a programme.
–
The inlet valve is not opened
far enough.
–
The inlet hose is kinked.
–
The water pressure is too
low. Call the Service Dept.
–
Clean the drain pump and
lint trap.
–
Has the drain hose been
installed too high? (max drain
height = 4 feet)
31