Table of Contents
Advertisement
System Service
7. If the terminal is configured for anything greater than 72 byte records, FCOPY will output the
following message. The message can be ignored by entering a RETURN.
*200*
8. The following characters should be displayed at the terminal. Verify that all characters are
correct. If the characters are incorrect, use SLEUTH to locate the problem.
1234567890
ABCDEFGHIJKLMNOPQRSTUVWXYZ
!"#$%&'()= -
",@@+*;:<>?,.I
9. The following message appears on the terminal:
EOF FOUND IN FROM FILE AFTER RECORD 2
3 RECORDS PROCESSED ***0 ERRORS
10. Terminate FCOPY by entering:
>EXIT
1-32.
HP 7920A DISC DRIVE VERIFIER, SLEUTH07
The SLEUTH07 program verifies the operation of an HP 7920A Disc Drive, formats disc packs, and
checks packs for surface damage.
The program, which resides in the field support account, must be copied to magnetic tape for
subsequent loading after the MPE Operating System is shut down.
Detailed instructions for loading and running SLEUTH07 can be found in the HP 7920A Disc Drive
Verifier SLEUTH07 Manual (part number 32230-90002).
The following procedure summarizes disc verification.
OPERATOR ACTION/COMMENTS
Program destroys data stored on customer's disc
pack(s). Be sure customer has dumped MPE Sys-
tem using a 0 dump date.
Cold load SLEUTH 3000 from I/O stand-alone
diagnostic tape.
Press RUN on System Control Panel. Press
RETURN on Console.
Mount tape containing SLEUTH07 and enter:
BAE
Type the SLEUTH RUN command.
1-28
CONSOLE MESSAGES/COMMENTS
>10
(a typical prompt for input)
>670
(a typical prompt for input)
7920 VERIFIER, ENTER DRT
#
JAN 1977
Advertisement
Table of Contents
