Miele SOFTTRONIC W 1113 Operating Instructions Manual page 33

To turn off the fault message: Turn off the washer using the "On/Off" button.
The drain is blocked. Clean the drain pump and
The drain hose is too
high.
The water intake is
blocked.
The inlet hose filter is
dirty.
There is a fault.
There is a fault.
lint trap. See "Washer care -
Cleaning the drain pump
and lint trap".
The maximum drain pump
height should not exceed 4ft.
(1.2 m).
Check to determine if:
– the water valve is open.
– the inlet hose is kinked.
Clean the filter under running
water and carefully remove
any large particles.
Call the Miele Service
Department.
Restart the program.
If the fault message appears
again, call Miele's Technical
Service Department.
29