Starting A Program - Miele PW 6065 Operating Manual

5. Starting a program

"Start" flashes when a program can be
started.
^ Press the "Start" button.
The "Start" button lights.
The display shows the approximate
program run time. It will count down in
minutes. The first 10 minutes the
washer calculates the water
absorbency of the laundry. The overall
program time may be shortened or
lengthened.
Additionally the sequence cycle is
displayed. The washer shows the
current program step.
The drum light turns off after the
program starts.
Press one of the following direct select
buttons during the running program:
– Button D "Extras"
the displayed Extras can be selected
or deselected after the program start.
– Button E "Delay Start"
the time of day and the approximate
program end is displayed.
– Button G "Cancellation"
to cancel the currently running
program. The wash water will be
drained away.
Using the washer
6. At the end of a program
The anti-crease program starts when
the laundry is not immediately removed
from the washer after the program end.
"Anti-crease" and "End" will flash
alternately in the display.
^ Use the a "Door" button to open the
drum door.
^ Remove the laundry.
Check the drum for any missed
pieces of laundry. Items
inadvertently left in the washer may
get damaged (e.g. shrink or
discolor) during the next wash cycle.
^ Check the folds of the door seal for
any small articles which may have
been trapped.
^ Close the drum door. Otherwise
foreign objects may find their way
into the drum. These could be
inadvertently washed and cause
damage to laundry.
15