REPLACING THE INNER PANE OF
GLASS
1.
Make sure the door is locked open
(see fig. 5.4c).
2.
Replace the inner pane:
•
Check that the four rubber pads are in
place ("D" in Fig. 5.6a).
•
Check that you are holding the pane
the correct way. You should be able to
read the wording on it as it faces you.
•
Insert the pane in the left "E" and right
"F" slide guides (fig. 5.6b), and gently
slide it to the retainers "H" (fig. 5.6c).
•
Reassemble the seal "G" in the correct
way (fig. 5.6d) by hooking the no. 3
fixing hooks in the proper holes (fig.
5.6e).
•
Unlock the oven door by opening it
completely and closing the lever "A"
on the left and right hinges (Fig. 5.6f).
Fig. 5.6c
The oven door
has a sealed
gasket in the
top part.
It is normal the opened gap between
the top edge of the inner glass and the
sealed gasket. This allows the cooling
air circulation.
E
E
Fig. 5.6b
H
Fig. 5.6f
D
Fig. 5.6a
F
F
G
Fig. 5.6d
Fig. 5.6e
A
21