Miele S 558 Operating Instructions Manual
Miele S 558 Operating Instructions Manual

Miele S 558 Operating Instructions Manual

Miele vacuum cleaner s 558 s 658 operating instructions

Advertisement

Operating instructions

Vacuum cleaner

S 558
S 658
UV
To prevent accidents
and machine damage,
read these instructions
installation and use.
M.-Nr. 05 638 551

Advertisement

Table of Contents
loading

Summary of Contents for Miele S 558

  • Page 1: Operating Instructions

    Operating instructions Vacuum cleaner S 558 S 658 To prevent accidents and machine damage, read these instructions installation and use. M.-Nr. 05 638 551...
  • Page 3: Table Of Contents

    ..........20 Crevice nozzle .
  • Page 4 Connecting the vacuum cleaner to a higher voltage than indicated in these instructions may result in damage to the vacuum cleaner or injury. To reduce the the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other.) This plug will fit in a...
  • Page 5 While Miele’s HEPA filter is certified to retain micro-particles, once any biohazardous material is introduced into the vacuum, the entire vacuum cleaner unit, floor...
  • Page 6 Do not turn on or attempt to operate the vacuum cleaner unless a dustbag, dust compartment filter and exhaust filter are in place. Use only genuine Miele double-layer dustbags and filters (see "Maintenance" for instructions on how to insert the dustbag and filters.) If a dustbag has not been inserted, the dust compartment cover will not close.
  • Page 7 The Miele Electrobrush is a motor driven accessory for use only with Miele vacuum cleaners. It must not be used with vacuum cleaners produced by other manufacturers. When vacuuming with the Miele Electrobrush or Turbobrush, do not touch the rotating brush.
  • Page 8 A damaged power cord must only be replaced with a genuine Miele cord by an authorized service agent. Do not leave the vacuum plugged in. Unplug from the outlet when not in use and before servicing. Do not put any object into openings.
  • Page 9 Lorsque vous utilisez un appareil électrique, vous devez toujours prendre des précautions essentielles, y compris ce qui suit. Vérifiez la tension nominale de l’aspirateur avant de le brancher. La tension électrique de votre résidence doit correspondre à celle qui est indiquée sur la plaque signalétique située sous l’aspirateur.
  • Page 10 Le filtre HEPA de Miele retient les particules microscopiques, mais lorsqu’une substance nocive pour l’organisme s’introduit dans l’appareil, celle-ci contamine l’aspirateur en entier,...
  • Page 11 à poussière, le filtre du réservoir à poussière et le filtre d’évacuation sont bien en place. N’utilisez que des sacs à poussière doublés et des filtres Miele (consultez la section « Entretien » pour les instructions d’insertion du sac à...
  • Page 12 Elle ne doit pas être utilisée avec des aspirateurs d’une marque autre que Miele. Lorsque vous nettoyez avec l’électrobrosse ou la turbobrosse Miele, ne touchez pas la brosse rotative. Lorsque vous utilisez l’aspirateur avec l’électrobrosse et un tuyau porteur de courant - Le tuyau contient des fils électriques.
  • Page 13 Nettoyez l’aspirateur seulement avec un tissu sec ou légèrement humide lorsqu’il est débranché. Ne l’immergez jamais dans l’eau. Le tuyau d’aspiration et le tube télescopique renferment des fils électriques. Les prises mâles ne doivent pas se trouver en contact avec de l’eau.
  • Page 15 a Handpiece b Suction power selector c Electrobrush switch d Locking button e Telescopic wand release button f Telescopic wand g Dust compartment lid release h Dust compartment filter (motor protection) i Dust bag j Electrobrush k Carrying handle l Suction wand holder m Exhaust filter n Power cord with plug o Cord rewind switch...
  • Page 16 The dust compartment shutter is designed for clean handling and prevents dust and odors from escaping. If you remove the suction hose from the vacuum cleaner for storage purposes close the dust compartment shutter before putting it away. ^ Insert the elbow into the suction socket.
  • Page 17 ^ Fit the handpiece of the suction hose firmly into the suction wand. (Ensure that the plug connectors line up.) They must lock together with a click. ^ To release the handpiece from the suction wand press the locking button and pull apart (see arrow). One part of the telescopic wand is inside the other and can be adjusted to your height for comfortable vacuum...
  • Page 18 The Electrobrush can also be used on smooth flooring surfaces. The standard floor brush (optional accessory) or the Miele parquet floorbrush should be used to clean delicate hard flooring and floor surfaces susceptible to scratching.
  • Page 19 Special brush with natural bristles for cleaning parquet and laminate floors, floorboards and flooring susceptible to scratching (e.g. with a high shine). Regard primarily the Cleaning and Care instructions of the floor covering manufacturer. ^ Push the telescopic wand into the floor brush and turn clockwise or counterclockwise until it clicks into position.
  • Page 20 Other tools, in addition to the floor brush(es), are supplied with the vacuum cleaner to help with various types of cleaning. (supplied seperately in the box) (see "Operation") only for S 658 The filter grill e is required if you wish to replace the "ACTIVE HEPA"...
  • Page 21: Crevice Nozzle

    ^ Press the release button to open the accessory compartment lid. ^ Take out the accessory needed. ^ Close the lid securely. (only for the S 658) The crevice nozzle extension is located in the compartment underneath the crevice nozzle.
  • Page 22 The different tools can either be fitted to the handpiece or to the suction wand. For cleaning in folds, crevices and corners. (only with model S 658) This accessory can be used to extend the length of the crevice nozzle. Further length is provided by pulling out the inner section.
  • Page 23: Dusting Brush

    For cleaning moldings, ornate or carved articles, etc. The head of the dusting brush can be swivelled to attain the best cleaning position. For cleaning upholstery, mattresses, cushions, curtains, covers etc.
  • Page 24: Auto-Reverse

    ^ Hold the plug and pull out the power cord to the required length: S 558: maximum 24 ft. (7.5 m) S 658: maximum 31 ft. (9.5 m) If the vacuum cleaner is operated more than 30 minutes the power cord must be unwind at least two thirds of the way.
  • Page 25 ^ Press the On-Off switch. The Stand-by indicator light comes on to show that the vacuum cleaner is ready for use. The vacuum cleaner can also stand on its end for vacuuming stairs, drapes etc. Vacuuming fine dust, flour or sawdust can create static charge which can discharge in certain circumstances.
  • Page 26 ^ Turn the vacuum cleaner on. Use the p and m on the handpiece to adjust the suction to suit the type of flooring. Setting 9 = no suction Low setting = weak suction High setting = strong suction The floor brush will require less effort to maneuver when the suction power is reduced.
  • Page 27 The Electrobrush is turned on and off seperately from the vacuum cleaner by pressing the j switch on the handpiece. This means that you can turn the Electrobrush off during vacuuming and the vacuum cleaner will continue to operate using suction only. This is useful, for example when moving from carpeting to a rug.
  • Page 28: Blower Connection Socket

    It can also be used to "blow out" the suction hose if it should ever become blocked. ^ Ensure that the vacuum cleaner is turned off. ^ Press the release button for the dust compartment lid and raise the lid so that it clicks into place.
  • Page 29: Park-System

    On-Off switch. Lifting the floor brush out of the Park-System turns the vacuum back on. ^ Stand the vacuum cleaner vertically. ^ Fit both clips on the floor brush into the two point holder on the side of the vacuum.
  • Page 30: Replacing One Type Of Filter With Another

    Turn off the vacuum and unplug it from the outlet before performing any maintenance work. The Miele filter system consists of three filters which must be replaced from time to time to ensure efficient suction. – Dustbag (filter bag) – Exhaust filter –...
  • Page 31 Change the dustbag when the colored marker in the dustbag change indicator fills the display. Miele dust bags are disposable and intended to be used only once. Do not attempt to reuse. ^ Attach the floor brush to the vacuum cleaner.
  • Page 32 ^ Open the dust compartment lid. The dustbag has a flap which closes automatically when the dustbag is removed to prevent any dust from escaping. ^ Grasp the collar by the two finger holes and pull it out from the dustbag holder.
  • Page 33 7) lights up. It is designed to light up after approximately 50 hours of operation which is about a year of average use. The vacuum cleaner can still be used with the exhaust filter indicator lit. However, the suction power will be reduced as will the effectiveness of the filter if it is not replaced.
  • Page 34 The filter change indicator (Reset button 7) needs to be reset each time the filter is replaced. To do this the vacuum cleaner must be plugged in. ^ Press the filter change indicator light until it goes out. The display is now...
  • Page 35 SUPER air clean filter should be replaced every time you start a new box of dustbags. (A SUPER air clean filter is supplied with every box of Miele dustbags). Pressing on the filter change indicator light will reset it. ACTIVE...
  • Page 36 A dust compartment filter is supplied with each box of Miele dustbags. ^ Open the dust compartment lid. ^ Open the filter frame, remove the old filter and replace with a new one.
  • Page 37 Turn off the vacuum and unplug it from the outlet when not in use and before service. The suction hose, the telescopic wand and the electrobrush contain electrical wires and pomponents. The plug connectors must not come in contact with water. These items may only be cleaned with a dry cloth, no moisture must touch them.
  • Page 38 A temperature limiter switches the the vacuum cleaner off automatically if it gets too hot. The warning light , will then come on to indicate "Warning - Overheating". This can occur if, for instance, large items block the suction wand or when the dustbag is full or contains particles of fine dust.
  • Page 39 In the event of a fault which you cannot correct, please contact the Miele Technical Service Department. 1-800-999-1360 techserv@mieleusa.com 1-800-565-6435 service@miele.ca...
  • Page 40 Recommended for cleaning and restoring crushed pile on low nap rugs or carpeting. The turbobrush is mechanically driven by the suction power of the vacuum. No electrical connection or electric hose is necessary. Observe the cleaning instructions of the floor manufacturer. The hand Turbobrush is intended for vacuuming upholstery, mattresses, car seats, carpeted stairs, etc.
  • Page 41 For cleaning smooth floors (e.g. stone, ceramic, vinyl). The standard floor brush can be used for normal cleaning of carpets, rugs, and hard surfaces.
  • Page 42 For cleaning radiators, narrow shelves or crevices. ^ Fit the radiator brush to the crevice nozzle. For dusting books, shelves, etc.
  • Page 43 For vacuuming mattresses and upholstery. Even deep crevices between mattresses can be vacuumed easily. For cleaning in folds, crevices and corners.
  • Page 44 Accessory carrying case consists of: – the Miele hand turbobrush – micro hose with Combi nozzle – crevice nozzle 12" (300 mm) – a 10 foot (3 m) long suction hose...
  • Page 45 ^ Connect the vacuum cleaner only to a 120 V, 60 Hz, 15 A outlet.
  • Page 46 These items pose a danger of suffocation. Genuine Miele dustbags and filters are made of environmentally friendly materials. They can be thrown out with the household trash provided the vacuum has been used only for normal household dust.
  • Page 48 Alteration rights reserved / 5003 M.-Nr. 05 638 551 / 01 This paper was bleached without the use of chlorine.

This manual is also suitable for:

S 658

Table of Contents