Table of Contents
Advertisement
FASTENING THE INSTALLATION BRACKETS
•
Each cooker top is provided with an installation kit including brackets and screws for
fastening the top to fixture panels from 2 to 4 cm thick.
•
Turn the cooker top upside down and fasten the brackets "
socket holes, without tightening the screws "B" for the moment.
•
Make sure that the brackets are fastened as shown in the figures.
FASTENING THE COOKER TOP
•
Spread the sealing material "
ctions overlap at the corners.
•
Insert the cooker top into the hole and position it correctly.
•
Adjust the position of the brackets "
hole. Tighten screws "B" to block the cooker top firmly in position.
•
With a sharp cutter or trimmer knife trim the excess sealing material around the edge
of the cooker top. Take care not to damage the benchtop.
Rear side
D
R
R
Fig. 4.6
14
(figs. 4.4, 4.5, 4.6)
D" out along the fixture hole, making sure that the jun-
F and R"; tooth C of the tabs should go into the
Fig. 4.4
C
B
F
(figs. 4.4, 4.5, 4.6)
Front side
C
R
F and R" to the appropriate
Fig. 4.5
D
B
F
F
Advertisement
Table of Contents
