Replacing the hinge covers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the hinge covers with the screw holes on the
computer base and snap the hinge covers into place.
2
Replace the screws that secure the hinge covers to the computer base.
Post-requisites
1
Follow the procedure from step 5 to step 11 in "Replacing the
2
Replace the
solid-state
3
Replace the
memory
4
Replace the
base
76
computer. After working inside your
drives.
modules.
panel.
After working inside your
palm
rest".