Charging The Power Bank; Charging Your Smartphone, Etc; Use - Justin JT-680-2500 User Manual

Before first use, charge the Power Bank a full 6 hours.
After the initial charge, normal charging will take 4-5
hours depending on the current of the Power Source.

1. Charging the Power Bank:

Plug the supplied Micro USB cable into the Power
Bank's Micro USB Input Port. Next, insert the USB end
of the charging cable into a computer or AC power
source with a USB Output of 5V. While charging, the
LED Indicator will FLASH Red. Once fully charged, the
LED Indicator will STOP flashing and remain lit.

2. Charging Your Smartphone, Etc:

If your device uses a Micro USB cable, simply use the
built-in Micro USB Output Power Cord to charge your
device. If your device uses an Apple
or other USB cable, please use the included Micro
USB Adaptor. Simply plug the Micro USB Output Cord
into the USB Adaptor. Using your device's specific
charging cable, plug your smartphone, tablet or other
USB powered device into the USB Adaptor Port. The
Power Bank will automatically begin charging your
device (The LED will light up Blue.) Charging will
continue until your device is fully charged or the Power
Bank has drained. To manually stop charging, simply
disconnect your device.
Please Note: When Charging an external device, if the
Battery Capacity is low the LED will begin to FLASH Blue.
Important: Please check for voltage compatibility with
your device prior to use.

USE

2
Lightning
® ™
cable,