Frequently Asked Questions - Miele GAS COMBISET CS 1011 Operating And Installation Instructions

Frequently asked questions

,
Repairs should only be carries out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage.
The burner does not ignite when the combiset is being used for the first
time or after an extended period of not being used.
Possible fault
There could be air in the gas pipe.
The On/Off and residual heat indicators are flashing.
Possible fault
There has been a power failure.
The On/Off indicator is flashing.
Possible fault
The gas supply has been cut-off.
20
Solution
You may need to make several
attempts before the burner ignites
successfully.
Solution
Turn all the controls clockwise to "ß".
You can now operate the appliance as
normal.
Solution
– Turn all the controls clockwise to
position "ß". You can now operate the
appliance as normal.
– If the problem persists, disconnect
the appliance from the electrical
supply for a few seconds.