Miele CS 1411 Operating And Installation Instructions page 4

IMPORTANT SAFETY INSTRUCTIONS
Technical Safety
~
Installation, repair and maintenance
work should be performed by a Miele
authorized service technician. Work by
unqualified persons could be
dangerous and may void the warranty.
~
Be sure your appliance is properly
installed and grounded by a qualified
technician.
~
Before installation or service,
disconnect the power supply to the
work area by unplugging the unit,
"tripping" the circuit breaker or
removing the fuse.
~
Before installing the fryer, check for
external visible damage. Do not
operate a damaged appliance.
~
Be certain your appliance is
properly installed and grounded by a
qualified technician.
To guarantee the electrical safety of this
appliance, continuity must exist
between the appliance and an effective
grounding system. It is imperative that
this basic safety requirement be met. If
there is any doubt, have the electrical
system of the house checked by a
qualified electrician.
~
Before installation, make sure that
the voltage and frequency listed on the
rating label correspond with the
household electrical supply. This data
must correspond to prevent injury and
appliance damage. Consult a qualified
electrician if in doubt.
4
~
Do not use an extension cord to
connect this appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance.
~
The combiset is not designed for
use with an external timer or a remote
control system.
~
Be sure that the power cord does
not come in contact with any "hot spots"
after installation.
~
This appliance must not be installed
or operated outdoors.
~
Do not use the appliance until it has
been properly installed in the
countertop.
~
Do not operate any appliance with a
damaged cord or plug, or if the
appliance has been damaged in any
manner. Contact Miele's Technical Ser-
vice Department.
~
Under no circumstances open the
outer casing of the appliance.
~
In the event of damage to the
appliance, it must be turned off immedi-
ately and disconnected from the main
power supply. Contact Miele's
Technical Service Department.
Do not use the appliance until it has
been repaired. Ensure power is not
supplied to the appliance until repair
work is completed.
~
Defective components should be
replaced with Miele original spare parts
only. Only with these parts can the
manufacturer guarantee the safety of
the appliance.