Removing A Jammed Capsule - Miele CVA 2652 Operating And Installation Instructions

Removing a jammed capsule

,Turn the machine off at the main switch in the upper left corner. Danger of
electric shock. The machine must be turned off before performing the next
steps.
What if F 72 appears in the display?
A capsule has jammed between the
capsule plate and the capsule
carousel.
^ Open the appliance door.
Turn off the appliance with the main
switch.
^ Attempt to pull out the carousel tray.
If the carousel tray could be pulled
out, remove and dispose of the
damaged capsule.
^ Clean the carousel tray niche.
Thoroughly clean the sensor and the
recess in the floor. Dry with a soft
cloth.
^ Return all parts to the machine, then
use the main switch to turn the
appliance back on again.
^ Close the door.
56
If the carousel cannot be pulled out :
^ Attempt to remove the capsule plate.
^ Look into the brew unit, attempt to
remove and dispose of the damaged
capsule.
^ Push in the capsule plate.
^ Return all parts to the machine, then
use the main switch to turn the
appliance back on again.
^ Close the door and follow the
instructions in the display.
If the fault still appears in the display or
the damaged capsule could not be
removed easily, contact Technical Ser-
vice.